10.3.3
Configuration / Language
This is used to select the menu language.
10.3.3.1 Selecting
10.3.4
Configuration / Unit
If 'litre' is selected for the 'internal' operation mode (see chapter 10.2.2) , this can be used to
change the display from litres/h to gallons/day (1 gallon = 3,785 litres).
10.3.4.1 Selecting
10.3.5
Configuration / Code
With this setting, a four-digit number combination can be assigned to secure the setting
against unauthorized adjustment.
If 'code' has been activated, the four-digit code must be entered before configured values
can be amended or the main menu can be accessed.
417101799_EMP_IV_E60.docx
Fig. 10.16
Default setting = German
Fig. 10.17
Default setting = liter
- 94 -
Rev. 9-06.11