Configuration / [Code] - Ecolab EMP Kompakt II DN20 Manuel D'utilisation

Commissioning
7.5

Configuration / [Code]

In the Code configuration setting a combination of numbers can be assigned in
order to secure the settings against unauthorised or unintentional adjustment.
If the code has been activated, the four-digit code must be entered before configured
values can be amended or the main menu for the pump can be accessed.
A code query has already been set in the factory!
In order to access the settings for the pump, enter the combination of
numbers 1412.
NOTICE!
Following an adjustment of the configuration, the concentration setting must
be verified by the customer.
Fig. 16: Overview of the code configuration
417101964 Rev. 4-04.2019 38