Wearing, Spare Parts And Accessories; Independent Conversion And Manufacture Of Spare Parts - Ecolab EMP Kompakt II DN20 Manuel D'utilisation

Wearing, spare parts and accessories

11 Wearing, spare parts and accessories
Read the User Manual for the EMP II E60 diaphragm metering pump,
Article No. 417101795
All the associated article numbers for the wearing and spare parts are
shown in the order parts list.
NOTICE!
Damage caused by using incorrect tools!
Damage may occur as a result of using incorrect tools during assembly,
maintenance or troubleshooting. Only use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
– All installation, maintenance and repair work may only be performed by
authorised and trained experts in accordance with valid local
regulations.
– The safety regulations and the required protective clothing when
working with chemicals must be complied with. Attention must be paid
to the information included on the product data sheet for the metering
medium used.
– The metering medium supply must be isolated and the system cleaned
prior to installation, maintenance and repair work.
NOTICE!
Only OE spare parts may be used for maintenance work and repairs.
11.1

Independent conversion and manufacture of spare parts

CAUTION!
Independent conversions or changes are only permissible following
consultation and with the approval of the manufacturer.
OE spare parts and accessories authorised by the manufacturer are in the
interests of safety.
If other parts are used, this invalidates liability for any resulting
consequences.
417101964 Rev. 4-04.2019
Ä Chapter 3 'Scope of supply' on page 20.
50