Indications Of Risks - Ecolab EMP Kompakt II DN20 Manuel D'utilisation

Safety
WARNING!
The protective earth connection is marked by this symbol at the connection
points.
2.11.1

Indications of risks

Risk due to electrical energy
DANGER!
Risk of fatal injury from electric current!
Contact with live parts represents immediate danger to life due to
electrocution. Damage to the insulation or individual components can be
life-threatening.
– Before starting work, create a de-energised state and ensure this state
for the duration of the work.
– Work on electrical components may only be carried out by professional
electricians.
– Turn off immediately and organise repairs if there is any damage to the
insulation voltage supply.
– Never bridge or decommission fuses.
– When replacing fuses, observe the correct rating.
– Keep voltage-carrying parts away from moisture, as this can cause a
short circuit.
Chemical hazards (metering medium/active substance)
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(metering medium).
– Read the enclosed safety data sheet carefully before using the metering
medium.
– The usual precautions when handling chemicals are to be followed.
– It is imperative to wash your hands before taking a break and at the end
of your shift.
– Read and comply with safety regulations and personal protective
equipment (PPE) prescribed on the safety data sheet for the chemicals
used.
ENVIRONMENT!
Leaked, spilled metering media may be harmful to the environment.
Leaked, spilled metering media must be cleaned and disposed of correctly,
according to the instructions on the safety data sheet. It is essential to
ensure that the required personal protective equipment is used.
417101964 Rev. 4-04.2019 18