Wearing Parts - Ecolab EMP Kompakt II DN20 Manuel D'utilisation

11.3.2

Wearing parts

There are wearing part sets available for the wearing parts:
The sets each consist of one piece:
n Suction valve (pos. 1)
n Pressure valve (pos. 1)
Connector set for tubes of 4/6, 6/8, 6/12 mm (pos. 2)
n
n Valve cartridge (pos. 3)
Bleed screw (pos. 6)
n
n Diaphragms (pos. 8)
n Support disk (pos. 9, not in type V3025)
n Bellows (pos. 11)
Wearing part set for the EMP II
V3014PPEPKE (1.4 l/h)
V3025PPEPKE (2.5 l/h)
Order key for the wearing part sets:
Fig. 24: Order key
11.3.3 Accessories
View
Wearing, spare parts and accessories
Description
Suction lance with empty signal input,
525 mm long, inclusive of a 2 m suction tube 6/8
and 2 m connecting cable with a plug
53
Article No. EBS No.
248462
on request
248471
Article No. EBS No.
249222 on request
417101964 Rev. 4-04.2019