Decommissioning, Dismantling, Disposal; General Risks - Ecolab EMP Kompakt II DN20 Manuel D'utilisation

13

Decommissioning, dismantling, disposal

Personnel:
13.1

General risks

DANGER!
Personal protective equipment, hereinafter referred to as PPE, is used to
protect personnel. It is imperative to pay attention to the PPE described in
the product data sheet (safety data sheet) for the metered medium.
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Immediately soak up any leaking liquids with a suitable binding agent
and dispose of properly.
– If necessary, place the product container in a tank.
– Wear non-slip, chemically resistant shoes when working.
DANGER!
Risk of fatal injury from electric current!
Contact with live parts represents immediate danger to life due to
electrocution. Damage to the insulation or individual components can be
life-threatening.
– Before starting work, create a de-energised state and ensure this state
is maintained for the duration of the work.
– Work on electrical components may only be carried out by professional
electricians.
– Turn off immediately and organise repairs if there is any damage to the
insulation voltage supply.
– Never bridge or decommission fuses.
– When replacing fuses, observe the correct rating.
– Do not expose live parts to moisture as this may cause short-circuits.
Decommissioning, dismantling, disposal
n Manufacturer
n Qualified electrician
n Mechanic
n Specialist
n Service personnel
59 417101964 Rev. 4-04.2019