Emp Ii E60 Diaphragm Metering Pump; Hydraulic Installation; General Information - Ecolab EMP Kompakt II DN20 Manuel D'utilisation

6.4

EMP II E60 diaphragm metering pump

Fig. 8: Suction lance connection (pos. I) and water meter pulse input (pos. II)
6.4.1

Hydraulic installation

General information:

Fig. 9: Examples of installation of the EMP II E60
n In order to minimise the degassing of the product, we recommend that you keep the
metering and suction lines as short as possible!
n Long and labyrinthine suction lines can lead to accumulation of air in the system.
n The suction height may not exceed 2 m!
(see
linktarget [417101964 12 Technische Daten] doesn't exist but @y.link.required='true'
n The suction line must always be installed sloping upwards towards the metering pump.
)
29
Installation
417101964 Rev. 4-04.2019