Configuration / Unit; Operation Mode; Selecting; Configuration / Code - Ecolab Elados EMP III E60 Mode D'emploi

10.3.4

Configuration / Unit

If 'litre' is selected for the 'internal' operation mode (see chapter
internal"), this can be used to change the display from litres/h to gallons/ h
(1 gallon = 3,785 litres).

10.3.4.1 Selecting

10.3.5

Configuration / Code

With this setting, a four-digit number combination can be assigned to secure the setting
against unauthorized adjustment.
If 'code' has been activated, the four-digit code must be entered before configured values
can be amended or the main menu can be accessed.
10.3.5.1 Selecting

10.3.5.2 Setting

417101441_EMP_III_E60.docx
10.2.2
Fig. 10.17 Configuration / Unit: Selecting
Default setting = liter
Fig. 10.18 Configuration / Code: Selecting
- Code query inactive.
(Default setting)
✓ Code query active.
see chapter
Fig. 10.19 Configuration / Code: Setting
- 105 -

"Operation mode /

10.3.5.2 "Configuration Setting"
Rev. 13-10.19