10.2.2
Operation mode / internal
The "internal" operation mode can be used to operate metering pump without external signals.
The following display options can be selected:
• Strokes/min
• Percent
Liter*
•
NOTE
10.2.2.1 Selecting
417101441_EMP_III_E60.docx
The configured metering speed (and thus the metering rate)
is displayed in strokes/min. (Default setting)
The configured metering speed (and thus the metering rate)
is displayed as a percentage.
The configured metering rate is displayed in litres/h
(optionally also in gallons/day or gallons/h).
*
For information on converting litres to gallons, see chapter
Fig. 10.3 Operation mode / internal: selecting
- 100 -
10.3.4
"Configuration / unit"
Rev. 13-10.19