Selecting; Display In The Operating Display With An Active Pulse Memory; Configuration / Oval Gear Meter; Plus - Ecolab Elados EMP III E60 Mode D'emploi

10.3.10.1

Selecting

10.3.10.2

Display in the operating display with an active pulse memory

Display in
operation
10.3.11 Configuration / Oval gear meter (only
The oval gear meter function makes it possible to record a "real" value in the operating
data/litre menu item (see chapter 10.5.3).
Furthermore, this menu item must be enabled to use the metering controller function
(see chapter 10.3.12).
The function oval gear meter can only be activated if the pump is upgraded with a
Box (Art. No.248606, EBS No. 10016094) to the
see Accessories) is connected.
To activate the Dongle-Box in connection with the oval gear meter, the power supply has to
be switched off and on again! (Unplug power plug or switch the pump off and back on
again!)
If the dongle box is fitted and is activated by switching the pump off and then on again,
"E60+" appears on the bottom left of the pump's display unit. If an
meter) is connected to slot V on the
and then on again, "E60++" appears on the pump's display unit, and the oval gear meter
function is automatically enabled under "Configuration" in the pump menu and the function
dosing regulator can be selected now.
If the pump software recognises that there is a
the communication is then interrupted between the pump and the periphery unit (e.g.
through the removal of the unit), an error message is displayed (see chapter
"Alarm messages (display)"). To prevent this error message appearing repeatedly, the
communication (connection) must be restored, or the analysis must be disabled in the
pump software. (see capter
in the pump software").
417101441_EMP_III_E60.docx
Meaning
Pulse multiplication
(Example: 10 external pulses
become 20 strokes)
Pulse division
(Example: 10 external pulses
become 20 strokes)
E60
dongle box
12.2.1 "Deactivating of the
Fig. 10.24 Configuration / pulse memory:
- pulse memory is inactive.
(Default setting)
pulse memory is active.
✓
Pos.
1 Pulse memory active
2 Number of pulses received
3 Set factor
Fig. 10.25 Display in the operating display with an active pulse memory:
pulse multiplication
Fig. 10.26 Display in the operating display with an active pulse memory:
pulse division
& OGM or OGM

PLUS

E60 PLUS and an OGM
and is activated by switching the pump off
dongle box or an OGM
dongle box
- 108 -
Description
)
PLUS
Dongle-
PLUS (oval gear meter
OGM PLUS (oval gear
connected, and
PLUS
12.2
or OGM PLUS
Rev. 13-10.19
Selecting