Overview; Operating Data / Operating Hours; Selecting / Displaying / Deleting; Operating Data / Litre - Ecolab Elados EMP II E60 Mode D'emploi

10.5.1

Overview

Fig. 10.62 Operating data: Overview
10.5.2

Operating data / Operating hours

The pump running time (number of strokes x 480 ms) is displayed since it was first
commissioned or last reset.
10.5.2.1

Selecting / Displaying / Deleting

Fig. 10.63 Operating data / Operating hours: Selecting / Displaying / Deleting
10.5.3

Operating data / Litre

The metered quantity in litres since the pump was first commissioned or last reset is
displayed. On operating the pump without an oval gear meter, this value is calculated
(ml/stroke x number of metered strokes). If an oval gear meter is connected, the measured
quantity is displayed (determined from the number of oval gear meter pulses).
10.5.3.1 Selecting / Displaying / Deleting
Fig. 10.64 Operating data / litre: Selecting / Displaying / Deleting
417101438_EMP_II_E60
see chapter
see chapter
see chapter
- 123 -
10.5.2
10.5.3
10.5.4
Rev. 12-01.19