General; Ebs Numbers; Transport Damage; Warranty Coverage - Ecolab Elados EMP II E60 Mode D'emploi

1 General

This operating instruction contains all of the instructions for installing, starting up, maintaining
and repairing diaphragm metering pumps of the
IMPORTANT
NOTE
If you have any questions, please contact us under the contact details given in
chapter 1.4
1.1

EBS numbers

Within this operating instructions article numbers and EBS numbers are represented.
EBS numbers are
1.2

Transport damage

CAUTION
If there is discovered a transport damage while unpacking the pump, it must not be
installed.
WARNING
1.3

Warranty coverage

Operational safety, reliability and performance of this model are only guaranteed by the
manufacturer if the following conditions are met:
• Mounting, connections, adjustment, service and repair are performed by authorized and
trained personnel.
The diaphragm metering pump must be used according to the specifications in the
•
operating instructions contained in the delivery scope.
Only original spare parts must be used for repairs.
•
• The warranty claim is invalidated if the pump housing is opened.
In addition, the general warranty and service conditions of the company
ECOLAB Engineering GmbH
1.4

Contact address / Manufacturer

Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf
Telefon (+49) 86 62 / 61 0
Telefax (+49) 86 62 / 61 219
eMail: engineering-mailbox@ecolab.com
417101438_EMP_II_E60
Please note your pump's software version when using these operating instruction
(see chapter 9.6).
The German sections of this manual constitute the ORIGINAL OPERATING MANUAL and
take legal precedence.
All other languages are translations of the ORIGINAL OPERATING MANUAL.
"Contact address / manufacturer"
Ecolab internal article numbers and used only "concern internal".
are applicable.
ELADOS ® EMP II E60
Fig. 1.1 QR-Code: Adresse
- 78 -
and EMP II E60 PLUS
Ecolab Engineering
Rev. 12-01.19
.