10.6
Draining the Reservoirs for Cleaning
IMPORTANT! Before shipping or servicing the unit, drain all water from the unit using these 3 ports. See Section
10.14 Preparing the Unit for Shipping.
Use the waste bottle or arrange an empty 4-litre (1 gallon) container on the floor near the autoclave and insert the free end of
the silicone drain tube (supplied with your STATCLAVE).
To drain CLEAN WATER reservoir:
1.
Open the unit door to connect the drain tube to the
CLEAN WATER reservoir's front draining port.
Drain the reservoir completely.
2.
Empty the container.
To drain Venturi reservoir:
1.
Open the unit door to connect the drain tube to the
Venturi reservoir's front draining port.
Drain the reservoir completely.
2.
Empty the container.
50