Enabling Remote Access For A Technician; Preparing The Unit For Shipping - SciCan STATCLAVE G4 Manuel De L'utilisateur

10.13

Enabling Remote Access for a Technician

Technicians and other authorized personnel may want to connect to your STATCLAVE from a remote location to review its
functioning or access stored information. To allow an external user to remotely access your STATCLAVE, you will need to
provide a security token to the person requesting access.
To obtain this code, from the home screen, select SETTINGS then USER and follow these steps:
1. Scroll to ONLINE and select.
2. Select REMOTE ACCESS.
3. Press ENABLE and wait a few seconds for a security
token to be provided.
Provide the token number to the technician requiring
4.
Remote Access.
DON'T press DISABLE until the session is complete or until otherwise instructed.
The token is valid for 2 hours after which the remote session automatically disconnects. To end the session earlier, select
DISABLE from the Remote Access screen to disable the token.
10.14

Preparing the Unit for Shipping

Most of the water can be drained from the system using the reservoir draining procedure described in Section 10.6 Draining
the Reservoirs for Cleaning. In addition, the back panel condenser must also be drained.
To drain the Condenser: Access the back of the unit to insert
the quick-connect drain tube into the condenser draining port.
54