SciCan STATCLAVE G4 Manuel De L'utilisateur page 18

3. Open the clean water reservoir located on the top right
of the unit. Using a large container, fill with distilled water
to the maximum fill level line or until you hear 3 BEEPs.
(For more fill options see Section 4. Filling the Water
Reservoirs.)
Open and fill the Venturi reservoir to the maximum fill
4.
level.
Open the door, plug the USB storage device into the
5.
USB port.
CAUTION! Hot Chamber.
The unit's Stand-by mode is preset to maintain a hot
chamber.
6. Make sure the bacteriological filter is securely in place.
7. Check your national and local guidelines for any
additional protocols and tests required before using
your unit.
16