SciCan STATCLAVE G4 Manuel De L'utilisateur page 16

Connecting to a Wireless Network
From the unit's home screen, select the SETTINGS icon, then follow these steps:
1.
3.
5.
7.
Data Security and WiFi
Ensuring your WiFi® connections are secure is an important element of safeguarding your organization's data. A WiFi
network using WPA2™ provides both security (you can control who connects to it) and privacy (the transmissions
cannot be read by others) for communications as they travel across your network. For maximum security, your
network should include only devices with the latest in security technology – WiFi Protected Access® 2 (WPA2).
Tips for securing your network
Change the network name (SSID) from the default name.
Change the administrative credentials (username and password) that control the configuration settings of your Access
Point/Router/Gateway.
Enable WPA2-Personal (aka WPA2-PSK) with AES encryption.
Wireless transmission considerations
To comply with Federal Communications Commission and Industry Canada Radiofrequency exposure compliance
requirements, the antenna used for this transmitter has been installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
(The transmission antenna for the wireless card is located in the front fascia.)
For the STATCLAVE Cybersecurity Statement, see Appendix C.
2.
4.
6.
8.
14