Setting Up Load Traceability With User Id, Pin, And Process Enforced Function - SciCan STATCLAVE G4 Manuel De L'utilisateur

8.1

Setting Up Load Traceability with User ID, PIN, and Process Enforced Function

The Process Enforced function keeps track of who has started and who has removed a load from your STATCLAVE. It does
this by prompting users to enter a PIN at the start of a cycle, when they STOP or CANCEL a cycle, and when they REMOVE a
load. Using Process Enforced does not restrict any functions, it is simply a means of tracking which of the registered users was
operating the unit. To use the Process Enforced feature, you must first assign User IDs and PINs.
To set up a User ID and PIN, select SETTINGS then USER and follow these steps:
1. Scroll to PROCESS and select.
2. Select USER.
3. From the SETUP PIN screen, you can assign up to 20
user IDs. Select one of the User icons to assign a PIN to
a user ID.
4. Using the keypad, assign a PIN of up to four digits.
Press EN to save.
5. Press the FORWARD icon to accept the new PIN.
6. Press the BACK icon to return to the User IDs.
To make a correction, select the User ID you want to change. On the next screen select Change password.
40