Retrieving Cycle Information Using The Usb Data Back Up - SciCan STATCLAVE G4 Manuel De L'utilisateur

9.3

Retrieving Cycle Information Using the USB Data Back Up

The USB storage device can be used to transfer cycle information stored in the unit to a computer. Best practice suggests this
should be done once a week. To transfer data using the USB port, follow these steps:
1. Insert the USB storage device into the USB port.
2. Press the USB icon.
Press the COPY icon.
3.
Press OK to copy cycle data to the USB device inserted.
4.
IMPORTANT! Data stored in the internal memory of the STATCLAVE can only be copied once. Data that has been
previously transferred will not be re-saved onto a new USB storage device. You can access previously transferred
information from your STATCLAVE G4's Web Portal.
When the activity light on the USB storage device stops blinking or the USB icon on the LCD turns from a flashing green to a
solid grey, remove the USB storage device and transfer the information to your computer.
IMPORTANT! If you select the USB storage device icon from the main menu, you will only be able to view the last
five complete cycles and the last five incomplete cycles. To view all the cycles stored on the USB storage device, you
must connect the device to your computer.
46