SciCan STATCLAVE G4 Manuel De L'utilisateur page 8

Other Features
Closed-door drying
Ensures your wrapped and pouched loads finish dry and ready to store.
Deep chamber
Holds up to 4 large and 4 small IMS cassettes or up to 20 pouched loads.
Reservoir fill options
Includes front and top options, as well as an autofill port at the back.
Chamber preheating
Programmable chamber preheating and unit Stand-by mode ensure the STATCLAVE is warm and ready when you need it.
Delayed start option
Every cycle features a delayed start option to help coordinate sterilization with your work flow or even start the day with a clean
instrument load.
Water quality sensor
Protects the unit from the long-term damage of unsuitable water.
Motor-less door latching mechanism
Provides improved reliability over motorized door locks.
Flip-top water reservoir
Makes the STATCLAVE easy to fill and clean.
Read-at-a-glance, colour touchscreen
Offers real-time monitoring of all the important sterilization parameters.
Easy-to-use emergency door opening
Simple procedure to open the door and retrieve instruments in the event of a power loss.
Programmable features
Automate your test cycles to be completed BEFORE the start of your work day.
Low water indicator
Know when there is not enough water to run a full cycle - before you start it.
Space-saving design
Front venting and recessed connections at the back allow the unit to fit snugly into compact steri-centres.
Door monitoring system
Tells you if the door is properly closed.
Safety Devices
Overheat thermostats
Band heater safety thermostats and steam generator safety thermostat protect the unit.
Pressure relief valve
Chamber pressure relief valve protects the unit and users.
Pressure or vacuum relief on power failure
Automatic pressure or vacuum relief protects users when the power is interrupted.
Electronics protection
Controller board fuses protect the unit's electronics.
6