Operating Principles, Key Features And Safety Devices - SciCan STATCLAVE G4 Manuel De L'utilisateur

Pay close attention to the following symbols that appear on the unit:
Caution: A potential hazard to the operator
Caution: Hot surface
Caution: Danger of electric shock.
Disconnect power supply when servicing unit.
Clean water fill
1.3

Operating Principles, Key Features and Safety Devices

The STATCLAVE is a dynamic air removal (pre-vacuum) table-top steam sterilizer that uses steam to sterilize wrapped and
unwrapped instrument loads typically used in dental and medical offices. It has six validated sterilization cycles with optimized
drying for fast, effective instrument processing. An additional custom cycle can be configured using one of three temperature
settings but this cycle must be validated by the user.
How it Works
The STATCLAVE uses a pre- and post-vacuum to condition the load at the beginning and end of each cycle.
›
The pre-vacuum draw removes the air from the chamber before sterilization begins. This ensures more efficient steam
penetration into every load.
›
The post-vacuum draw at the end of the cycle pulls the moist air from the chamber while heater bands warm the
chamber walls to speed drying.
›
Finally, fresh, filtered air is drawn into the chamber to eliminate condensate and cool the chamber. This reduces the
cooling time and ensures the load is dry the moment you open the door.
Why Connect It
STATCLAVE's WiFi-enabled G4 technology can connect and send cycle data to a smart device or computer, allowing staff
to focus on the most important thing in a dental practice, the patients. Maintenance reminders, instructions and the option
for automatic user interface software updates keep your STATCLAVE in good working order. Should your unit experience an
error, G4 technology connects it to specialized technicians who can provide remote support that can minimize unnecessary
downtime.
Venturi reservoir drain
Clean water drain
Condenser drain (only used for shipping and
servicing)
Exhaust drain
5