Using The Delayed Start - SciCan STATCLAVE G4 Manuel De L'utilisateur

Opening the door after pressing STOP
Once a cycle has been stopped, the STOP button must be pressed before another cycle can be started. To start a new cycle
or to open the door:
1. Press the STOP icon to continue.
2. Press the LOCK icon.
3. Press the UNLOCK icon.
Press the BACK icon to return to the home screen.
If Process Enforced usage is enabled, you will be prompted to enter your User ID and PIN before opening the
door. A non-registered user can open the door by pressing the SKIP icon.
6.3

Using the Delayed Start

1. Select any cycle.
Press the DELAYED START icon.
2.
3. Enter the number of hours and minutes for the delayed
start.
Press the FORWARD icon to begin the countdown.
Press the BACK icon to stop and reset countdown.
The LCD will remain in countdown mode until the cycle
begins.
31