SciCan STATCLAVE G4 Manuel De L'utilisateur page 3

Quick Start Guide
1. Switch the autoclave ON.
3. Ensure BOTH drainage tubes are connected at the back.
More information in SECTION 2.3
5. Insert the load.
CAUTION! Hot Chamber.
More information in SECTION 5.
7. Select a cycle.
More information in SECTION 7.
2. Ensure BOTH reservoirs are filled with high quality distilled water.
IMPORTANT! Never Use Tap Water.
More information IN SECTION 4.
4. Pull up on the door latch to open the door.
More information in SECTION 1.7
6. Close and latch the door.
8. Press the START icon.