Cleaning And Maintenance; Cleaning; Maintenance - SciCan E-STATIS Prep 40-P Manuel De L'opérateur

2 Cleaning and Maintenance

2 Cleaning and Maintenance

Cleaning

Disinfect the motor by wiping after each treatment.
The motor MUST be cleaned and CAN BE sterilized.
Use only disinfectants approved within the market of use.
Disinfect with a clean, damp cloth using isopropyl alcohol - see illustration below.
Do not exert any pressure on the LCD screen.
Do not use products containing acetone, chlorine or bleach as disinfecting agents.
Never immerse in solvent.
Not suitable for cleaning in an ultrasonic bath.

Maintenance

ATTENTION!
Repair and maintenance work on the electrical part of the E-STATIS Prep 40-P must be performed only by
specialists or by persons trained in the factory and familiarized with the safety regulations.
DO NOT OPEN CONTROL BOX. There are no serviceable parts inside the control box.
Page 7
E-STATIS Prep 40-P