Specifications; Control Unit; Power Supply; Media Supply Data To Control Unit - SciCan E-STATIS Prep 40-P Manuel De L'opérateur

7 Specifications

7 Specifications

Control Unit

Motor speed range (forward / reverse):
Output torque:
Motor current:
Motor voltage:
Operation mode:
Current of LED
Weight:
Dimensions (Width/Height/Depth):
Rotation:
Sound level:
Instrument connection:
Protection class:
Overvoltage category:
Pollution degree:
Device classification of applied part (EN 60601):
Protection category:

Power Supply

Rated voltage:
Rated frequency:
Power consumption:
Operation mode:
Weight:
Dimensions (Width/Height/Depth):
Protection class:
Overvoltage category:
Pollution degree:
Protection category:

Media Supply Data to Control Unit

System pressure:
Spray air:
Spray water:
Air requirements:
Air filter:
Water quality:
ph-value:
Water filtration provided by customer:
Page 19
Duty cycle: 0.5 on / 9 off min
110 x 76 x 175 (4.33 x 2.99 x 6.89) mm (inch)
clockwise / counter-clockwise
Part of class II system
Duty cycle (0.5 on / 9 off) min
130 x 30 x 60 (5.12 x 1.18 x 2.36) mm (inch)
1.0 to 2.5 (14.5 to 36.2) bar (psi)
0.8 to 2.0 (11.6 to 29) bar (psi)
Dry, free from oil, clean, uncontaminated
according ISO 7494-2
2,000 to 40,000 rpm
max. 3.0 Ncm
max. 5.7 A / Phase
max. 22 V AC
max. 250 mA
0.69 (1.521) kg (lbs)
< 40 dBa
ISO 3964
II
P2
Type B
IP 20
100 to 240 V AC
50 / 60 Hz
60 VA
0.28 (0.617) kg (lbs)
II
II
P2
IP 40
1.8 to 4.0 (26 to 58) bar (psi)
50 µm
Tap water
7.2 to 7.8
80 µm
E-STATIS Prep 40-P