Yamaha F15MHX Manuel D'entretien page 366

LOWR
SHIMMING (FT9.9D)
SHIMMING (FT9.9D)
NOTE:
9 There is no need to select shims when
reassembling with the original case and
inner parts.
9 Shim calculations are required when
reassembling with the original inner parts
and a new case (the difference between
the original inner parts and the new case).
9 Measurements and adjustments are
required when replacing an inner part(s).
SHIM SELECTION
Pinion gear shim
1. Measure:
9 Measurement (Mv
Digital caliper:
90890-06704
NOTE:
Measure the thickness (Mv
and washer.
2. Calculate:
9 Pinion gear shim thickness (T3)
Pinion gear shim thickness:
(T3) = 6.05 - Mv
3. Select:
9 Pinion gear shim
Calculated numeral
more than
1.13
1.20
Available shim thickness:
1.13 and 1.20 mm
6-44
)
3
) of the bearing
3
mm
3
Shim
or less
1.20 1.13
1.30 1.20
E