Ryobi RBV26 Manuel D'utilisation page 22

EN
FR DE ES
Problem
Engine fails to start.
Engine hard to start.
Engine lacks power.
Engine overheats.
IT PT NL SV DA
English(Original instructions)
Possible Cause
No fuel in tank.
Spark plug shorted or fouled.
Spark plug is broken, (cracked
porcelain or electrodes broken)
Ignition lead wire shorted, broken,
or disconnected from spark plug.)
Ignition inoperative.
Water in petrol or stale fuel
mixture.
Too much lubricant in fuel mixture.
Engine is under or over choked.
Weak spark at spark plug.
Air filter clogged.
Insufficient lubricant in fuel
mixture.
NO FI HU CS RU
TROUBLESHOOTING
Solution
Fill tank.
Replace spark plug.
Replace spark plug.
Replace lead wire or attach to spark plug.
Contact authorized service centre.
Drain entire system and refill with fresh fuel.
Drain and refill with correct mixture.
Adjust choke as necessary.
Contact authorized service centres.
Clean air filter. Refer to Cleaning the Air Filter
Screen earlier in this manual.
Mix fuel as described in starting instructions.
20
RO PL SL HR ET LT LV SK BG