Finishing Up; J2534 Config App - Bosch MTS 6517 VCI Notice Originale

6.

Finishing Up

After using the MTS 6517 VCI, a few simple steps help
you leave the vehicle electronic system(s) in the proper
state and ensure that you get the most use out of your
diagnostic tools:
1. Before turning the VCI off, exit any running PC com-
puter applications.
2. Turn off the VCI by disconnecting power from ve-
hicle DLC, USB or optional 12 volt power adapter.
3. Disconnect the VCI's J1962 16/26 Pin DLC cable
from the vehicle.
4. Disconnect the USB cable from the PC and the VCI.
5. Store the VCI, cables, and other parts in a secure,
dry location.
Robert Bosch GmbH
7.

J2534 Config App

The MTS 6517 VCI is a J2534 device that connects be-
tween your computer and the vehicle's J1962 DLC con-
nector for pass-thru programming of the vehicle's ECUs.
The J2534 Config App is installed on your PC at the
same time as the VCI Manager software, allowing you
to keep your OEM PC application connected to a VCI. In
addition, this application provides API Monitoring con-
trols to aid in investigating problems encountered while
using any J2534 or PDU VCI devices or PC applications
devices.
Device Configuration
The Device Configuration controls in the
J2534 Config App allow you to define a default VCI
and a connection sequence that your OEM PC applica-
tion will follow to connect to your VCIs. There are two
controls in this area: the Default Device control and the
Auto-Connection Order control.
The Default Device text box allows you to type the se-
rial number of the VCI that you want to define as your
default device.
The Auto-Connection Order control allows you to select
multiple connection methods.
R
Device on USB
R
Default Device
R
Device Explorer
| MTS 6517 VCI | 31 en
|
1699200092 B 2017-06-20