Configuration Mode; Operating Mode - ero electronic FKS-MK1 Manuel De Service

1 0 . DEFAULT PARAMETERS 1 0 . 1 0 . 1 0 . 1 0 . DEFAULT PARAMETERS DEFAULT PARAMETERS DEFAULT PARAMETERS DEFAULT PARAMETERS
In both working modes, configuration and operating, the
parameters can be set with predefined values.

Configuration mode

Configuration mode Configuration mode Configuration mode Configuration mode
Press keys
+
The instrument will display:
d L . O F d L . O F
d L . O F d L . O F d L . O F
By means of keys or select the type of table required.
The instrument will display:
d L . 1 d L . 1 d L . 1
d L . 1 d L . 1
for table 1 (or European) or
d L . 2 d L . 2 d L . 2
d L . 2 d L . 2
for table 2 (or American).
Press FUNC FUNC to confirm. FUNC FUNC FUNC
When loading the data the instrument will display
L O A d L O A d L O A d L O A d L O A d
N O T E : N O T E : N O T E :
N O T E : N O T E :
As indicated in the tables, both the configuration data and the
operating data will be modified.
fks-MK1-A1-A0.pmd 1

Operating mode

Operating mode
Operating mode Operating mode Operating mode
Press keys +
The instrument will display:
d L . O F d L . O F d L . O F d L . O F d L . O F
Enable the command by means of keys or
instrument will display:
d L . O n d L . O n d L . O n d L . O n d L . O n
Press FUNC FUNC FUNC FUNC to confirm.
FUNC
When loading the data the instrument will display:
L O A d L O A d L O A d L O A d L O A d
A. 1
09/05/2006, 10.03
. The