Technical Features - ero electronic FKS-MK1 Manuel De Service

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

E.500
Error during auto-zero measurement
E.502
Error during reference junction measurement.
NOTE: this error may be generated by an ambient
NOTE:
NOTE:
NOTE:
NOTE:
temperature higher than 70 °C (158 °F) or lower than -
20 °C (-4°F).
E.510
Error during calibration procedure
When one of these errors is detected, contact your supplier.
The instrument also checks if there are any fatal errors. If any are
detected, it displays a special code and, after 2 sec., resets the
system and starts again.
0.
error on the CPU "stack pointer
4.
error on the EEprom check signals
5.
program sequence wrong during the access to EEprom
6.
timeout from "watchdog" (also appears going from
Configuration mode to operating mode and vice versa).
When one of these errors is detected, contact your supplier.
fks-MK1-1-A0.pmd
20
9 . 9 . 9 . 9 . 9 . TECHNICAL
TECHNICAL
TECHNICAL
TECHNICAL
TECHNICAL
FEATURES
FEATURES
FEATURES
FEATURES
FEATURES
Case
Case
Case
Case
Case: Polycarbonate brown transparent color.
Degree of self-extinguishing: V2 according to UL 94
Front protection - designed and tested for IP 65 and NEMA
Front protection
Front protection
Front protection
Front protection
4X for indoor locations (when panel gasket is installed).
(Test were performed in accordance with CEI 70-1 and NEMA
250-1991 STD).n accordo agli standard CEI 70-1 e NEMA 250-
1991)
Weight
Weight
Weight: 90 g.
Weight
Weight
Power consumption: 2.5 Watts max.
Power consumption
Power consumption
Power consumption
Power consumption
Insulation
Insulation
Insulation
Insulation: according to EN 61010-1
Insulation
Display updating time: 500 ms.
Display updating time
Display updating time
Display updating time
Display updating time
Sampling time:
Sampling time:
Sampling time:
Sampling time:
Sampling time:
- 250 ms for linear inputs
- 500 ms for TC and RTD inputs.
Accuracy
Accuracy
Accuracy: + 0,2% f.s.v. + 1 digit @ 25 °C (77 °F) and nominal
Accuracy
Accuracy
power supply voltage.
Common mode rejection
Common mode rejection
Common mode rejection: 120 dB @ 50/60 Hz.
Common mode rejection
Common mode rejection
Normal mode rejection:
Normal mode rejection: 60 dB @ 50/60 Hz.
Normal mode rejection:
Normal mode rejection:
Normal mode rejection:
Electromagnetic
Electromagnetic
Electromagnetic
Electromagnetic
Electromagnetic
compatibility
compatibility
compatibility
compatibility
compatibility
r e q u i r e m e n t s :
r e q u i r e m e n t s :
r e q u i r e m e n t s :
r e q u i r e m e n t s :
r e q u i r e m e n t s :
This instrument conforms to EU directives 89/336 (harmonised
reference standard EN 61326
Emission
Emission
Emission
Emission
Emission
requirements:
requirements:
requirements:
requirements:
requirements:
Class A for 24VAC/DC power supply
Class B for 100/240VAC power supply)
and to directives EU 73/23 or EU 93/68
(harmonised reference standard EN 61010-1)
Installation category: II
Installation category
Installation category
Installation category
Installation category
Pollution degree:
Pollution degree:
Pollution degree:
Pollution degree: 2
Pollution degree:
Temperature drift
Temperature drift: (CJ excluded)
Temperature drift
Temperature drift
Temperature drift
< 200 ppm/°C of the span for linear range and TC type K, T and N
< 250 ppm/°C of the span for TC range type L, J, S, R and B
< 350 ppm/°C of the span for TC range type W5
< 500 ppm/°C of the span for Rtd ranges
Operative temperature
Operative temperature
Operative temperature
Operative temperature: from 0 to 50 °C (+32 to 122 °F).
Operative temperature
Storage temperature:
Storage temperature:
Storage temperature:
Storage temperature:
Storage temperature: -20 to +70 °C (-4 to 158 °F)
Humidity
Humidity
Humidity: from 20 % to 85% RH, non condensing.
Humidity
Humidity
Control output updating time
Control output updating time
Control output updating time
Control output updating time
Control output updating time:
- 250 ms when a linear input is selected
- 500 ms when a TC or RTD input is selected.
GB
20
09/05/2006, 15.06
and
and
and
and
and
safety
safety
safety
safety
safety

Publicité

Table des Matières
loading

Table des Matières