Lexicon Vortex Mode D'emploi page 44

Rate 1*
Depth 1
VIBRATO 1
Mod
Fx Lvl
Res 1
Res 2
VIBRATO 2
Rate 2*
Depth 2
ECHO 1
Echo
Fx Lvl
ECHO 2
* ENVELOPE Increases vibrato rates
ECHO FX LVL Left input into echoes
MOD FX LVL Right input into vibrato
FEEDBACK 1 Feedback gain around ECHO 1
FEEDBACK 2 Feedback gain around ECHO 2
RATE 1 Vibrato 1 rate
DEPTH 1 Vibrato 1 predelay
RESONANCE 1 Vibrato 1 and Vibrato 2 resonance
RATE 2 Vibrato 2 rate
DEPTH 2 Vibrato 2 predelay
RESONANCE 2 Vibrato cross-mix
English
Fbk 1
Fbk 2
41
Duo B is configured as two independent mono in/stereo out
effects. The left input feeds a dual vibrato effect. The right
input feeds a dual delay effect.
ENVELOPE increases vibrato rates, with louder notes making the
vibrato quicker. DEPTH 1 and DEPTH 2 control offset delay for the
left and right vibrato. Small differences in these two values will widen
the mono signal.
RESONANCE 1 is the resonance gain for both VIBRATO 1 and
VIBRATO 2. RESONANCE 2 is a cross-mix control for the vibrato
effect. As RESONANCE 2 is increased, the outputs of VIBRATO
1and VIBRATO 2 (in addition to being sent to the left and right) are
sent to the opposite outputs. This fills in the center of the stereo
vibrato effect.
The Preset is designed to work with either a mono signal, or with
two different signals feeding left and right. The left is set to produce
a dynamic stereo vibrato. The right is set to create a stereo echo
effect with quarter-notes in the left side and quarter-note triplets on
the right side.
B
8 DUO