Effect Parameters - Lexicon Vortex Mode D'emploi

Adjusting Parameter Values
Each effect in Vortex has sixteen adjust-
able parameters. Control over these param-
eters is simple — select a parameter with the
PARAMETER knob, then adjust it with the
VALUE knob. All parameter settings made
from the front panel can be stored with the
effect.*
Select a parameter.
PEDAL/TAP
FEEDBACK 1
ECHO 2 FEEDBACK 2
ECHO 1 RATE 1
DEPTH 1
ENVELOPE
RESONANCE 1
MORPH A/B
ECHO FX LVL RATE 2
MOD FX LVL DEPTH 2
RESONANCE 2
OUTPUT
MIX
Parameter values (1-64)
will be displayed when
VALUE is turned.
The decimal point indicates changes have
been made since the last store operation.
* Parameter changes made with an expression
pedal are not automatically stored with the ef-
fect. See Pedal Control .
English
The VALUE knob is always active, and will
adjust whichever parameter is indicated by
the PARAMETER knob. The first turn of
VALUE will display the current parameter
setting and light the VALUE LED. Subse-
quent adjustments will increment or decre-
ment parameter values along their entire
range (1-64).
Use the VALUE knob to adjust
the selected parameter.
A/B VALUE
A
B
VALUE
The VALUE LED lights whenever
parameter values are displayed.
11

Effect Parameters

The decimal point on the display will light
when a parameter is adjusted to indicate that
the effect has been modified since the last
store operation. If no further adjustments are
made with VALUE, the display will revert to
showing the number of the currently running
effect. The edit indicator will remain on until
the effect is stored, or until changes are lost
by selecting another effect with the REGIS-
TER/PRESET knob.