Aerosol - Lexicon Vortex Mode D'emploi

Rate 1*
Depth 1
Res 1
MOD 1
Fbk 1 ECHO 1
Fbk 2
MOD 2
Rate 2*
Depth 2
Res 2
* ENVELOPE Increases both rates
ECHO FX LVL Delayed mod output level
MOD FX LVL Undelayed mod output level
FEEDBACK 1 Input/feedback mix (1=no feedback; 64=infinite repeat)
FEEDBACK 2 Feedback/cross-feed mix
RATE 1 MOD 1 speed
DEPTH 1 MOD 1 depth
RESONANCE 1 Left/right cross-resonance gain
RATE 2 MOD 2 speed
DEPTH 2 MOD 2 depth
RESONANCE 2 Left/right resonance gain
English
Mod Fx Lvl
Echo
ECHO 2
Fx Lvl
increase the speed of modulation. Using RESONANCE 2 alone
(RESONANCE 1=1) maintains a stereo image in the modulation
effect. RATE 1 and DEPTH 1 will affect left modulation and RATE 2,
Mod Fx Lvl
DEPTH 2 will affect right modulation.
modulation signals together. The rate and depth controls will affect
both left and right.
of available delay time. FEEDBACK 2 controls the mix of ECHO 1
feedback and ECHO 2 feedback. When this value is 1, this mix is all
ECHO 1 feedback. At 64, the mix is all ECHO 2 feedback (producing
the longest echoes.) Between these extremes, ECHO 1 is fed by a
mixture of the two feedbacks. These intermediate settings produce
echo rhythms that change over time.
fed into ECHO 1. When FEEDBACK 1=1, there is no feedback. At 64,
only feedback is sent into the echoes. This creates an infinite loop.
echoes.
34
Aerosol A has two modulators which interact to produce a
variety of modulation effects (flanger, vibrato, chorus, etc.)
The modulators feed two echoes which are configured as a
cascade looper.
ENVELOPE increases RATE 1 and RATE 2, so that loud signals
Using RESONANCE 1 (cross-resonance) mixes the left and right
Having the two echoes cascaded doubles the maximum amount
FEEDBACK 1 controls the mix of input signal and feedback mix
The Preset is set to produce a very deep stereo flange with subtle
A

5 AEROSOL