Information About Emc In; General Information - Durr Dental VistaScan Mini Notice De Montage Et D'utilisation

Appendix
16 Information about EMC in accordance with EN 60601-1-2

16.1 General information

The information in this leaflet includes excerpts from the relevant European standards for electrical,
medical devices� It must be observed when installing Dürr Dental devices or combining them with
products of other manufacturers� If you are uncertain about anything, please refer to the complete
standard�
16.2 Abbreviations
EMC Electromagnetic compatibility
HF High frequency
U Rated voltage of the device (supply voltage)
EN
T
V , V Compliance level for the test in acc� with IEC 61000-4-6
1 2
E Compliance level for the test in acc� with IEC61000-4-3
1
P Rated power of the transmitter in Watts (W) in accordance with the specifications of the
transmitter manufacturer
d Recommended safety distance in metres (m)
16.3 Guidelines and manufacturer's information
Electromagnetic emissions for all devices and systems
The device is designed for operation in an electromagnetic environment as specified below� The cus-
tomer or operator of the device should ensure that the device is operated in such an environment�
Interference emission
measurements
HF emissions in accord-
ance with CISPR 11
HF emissions in accord-
ance with CISPR 11
Harmonics in acc� with
IEC 61000-3-2
Voltage fluctuations/flickers
in acc� with IEC 61000-3-3
42
Compli- Electromagnetic environment - guidelines
ance
Group 1 The device uses HF energy exclusively for internal func-
tions� As a result, HF-transmissions are very low and it is
highly unlikely that any interference will be caused to
neighbouring electronic devices�
Class B The device is suitable for use in all facilities including
those in living areas and areas that are directly connect-
ed to the public mains electricity supply that also sup-
Not applica-
plies buildings used for residential purposes�
ble
Not applica-
ble
2141100009L30 1612V001