Durr Dental VistaScan Mini Notice De Montage Et D'utilisation page 64

Product description
Operating elements
9
8
7
EN
1 Display (only VistaScan Mini Plus)
2 Green operating LED
3 Blue communication indicator
4 Cleaning display yellow
5 Cleaning button
6 On/off switch
7 Green status LED
8 Yellow status LED
9 Red status LED
The status LEDs display the following status
messages:
Ready for operation
Not ready for communication
Device currently switching off
Cleaning position
Cover or input unit not correctly
mounted
Error
Cover missing
Image plate currently being processed
Image plate currently being processed
Light protection cover can be removed
and the next image plate can be insert-
ed
12
1
2
3
4
6 5
Input unit ready for operation
The next image plate can be inserted
Device starting up from standby mode
Status LED flashing
Status LED off
Connections
The connections are located on the rear of the
unit, underneath the cover�
1 Connection for power supply unit
2 Reset button
3 AUX connection for diagnostic units
4 Network connection status LEDs
5 Network connection
6 USB port
5.2 Image plate
The image plate stores X-ray energy, which is
re-emitted in the form of light after excitation via
the laser� This light is then converted to image
information in the image plate scanner�
The image plate has an active side and an inac-
tive side� The image plate must always be ex-
posed on the active side�
When used properly, image plates can be ex-
posed, read and erased several hundred times
provided there is no mechanical damage� The
image plate must be replaced if there are any
1
2
3
4
2141100009L30 1612V001
5
6