Blodgett Export Serie Manuel D'installation Et D'utilisation page 24

ELECTRICAL COMPONENTS
1. Turn off the main electrical connection to the
oven.
2. Remove the components from the panel and
set the wiring aside.
3. Reinstall the components.
GAS CONTROL COMBINATION
NOTE: Gas models only.
1. Shut off the gas and turn off the power to the
oven.
2. Remove the electrical connection.
3. Remove the gas connection in front of and be-
hind the control combination.
4. Remove the pilot line, replace, reinstall, and
adjust. Check for gas leaks.
Combustion
Cover
All manuals and user guides at all-guides.com
DFG-100-3 Shown
Figure 21
21
Maintenance
Replacement of Parts
REMOVAL OF BURNER
NOTE: Gas models only.
1. Shut off the gas and turn off the power.
2. Remove the combustion cover.
3. Remove the gas connection, etc.
4. Remove the screws from the burner mounting
bracket.
5. Remove the burner from the combustion
chamber.
6. Replace pilot burner if necessary. Install the
burner.
CONTROL COMPARTMENT COMPONENTS
1. Switch power off.
2. Remove the combustion cover.
3. Remove the control compartment cover.
4. Slide the control panel out.
5. Replace and repair the respective compo-
nent.
6. Install the panel, the control compartment
cover and combustion cover.
Control Cover