Blodgett Export Serie Manuel D'installation Et D'utilisation page 20

All manuals and user guides at all-guides.com
2
3
6
7
9
10
Figure 17
OPERATION
NOTE: Operation is restricted to qualified person-
nel.
1
NOTE: Electric models only.
1. Close the oven door.
2. Turn the SELECTOR Switch (1) to OVEN ON.
3. Rotate the TEMPERATURE DIAL (4) to the de-
sired cooking temperature.
The LIGHT OFF OVEN READY (2) will light.
4. Press the COOK HI/LO FAN key (6) to select
the fan speed.
5. Press the FAN CON/CYC key (9) to select the
fan mode.
6. To display the temperature within the oven,
press and hold the ACTUAL TEMP key (5).
The oven has reached temperature when the
LIGHT OFF OVEN READY (2) light goes out.
NOTE: If the oven will not start after several at-
tempts contact a qualified installer.
For Cook and Hold:
NOTE: Set the hold time before loading the prod-
4
uct.
1. Press the HOLD KEY (7).
2. Rotate the DIAL (3) to enter the hold time.
5
Chain Event Programming:
1. Press PGM MODE ON/OFF (10).
2. Press the desired PGM# (8) key to program.
3. Set the temperature, fan speed, fan mode and
8
cook time. See above.
4. Press the EVENT # (11) key to advance to the
next event.
5. When all events have been programmed
press PGM MODE ON/OFF (10).
To use programming:
1. Load the product.
11
2. Press desired PGM # (8) key.
Shut Down
1. Turn the SELECTOR SWITCH (1) to OVEN
OFF.
17
Operation
Intelliplus