Blodgett Export Serie Manuel D'installation Et D'utilisation page 15

Operation
AC-500 Solid State Controls
2
3
8
9
Figure 13
All manuals and user guides at all-guides.com
OPERATION
1
NOTE: Operation is restricted to qualified person-
1. Turn on the gas valve (9).
2. Close the oven door.
3. Turn the SELECTOR Switch (1) to the desired
4. Set THERMOSTAT (7) to the desired tempera-
4
5
6
7
NOTE: If the oven will not start after several at-
For the HUMIDAIRE control option:
1. When steam is desired, set the STEAM
2. Momentarily press and release the STEAM
Shut Down
1. Turn the SELECTOR Switch (1) to OFF.
2. Shut off the gas valve (9).
12
nel.
cook position.
The fan will start to turn and the temperature
control will go on.
ture.
The elements will come on. The OVEN READY
light (6) on the control panel will illuminate.
If in starting, the burner does not ignite within
a few seconds, the RESET alarm light (3) will
go on. Press the RESET switch (2) to restart
the burner.
The LIGHT OFF OVEN READY light (6) will go
out when the oven has reached temperature.
tempts contact a qualified installer.
CYCLE TIMER (8) to the required injection
time.
CYCLE START button (4). The STEAM indica-
tor (5) will light as water is injected into the
baking compartment.