Blodgett Export Serie Manuel D'installation Et D'utilisation page 17

Operation
CH-Pro3 (Solid State Programmable Digital Control)
1
2
4
5
7
8
10
12
13
15
16
Gas Models
Only
Figure 15
All manuals and user guides at all-guides.com
NOTE: Operation is restricted to qualified person-
OPERATION
Oven Startup:
1. Turn the SELECTOR SWITCH (1) to the de-
NOTE: If the oven will not start after several at-
Manual Operation:
NOTE: Press the arrow keys to change the cook
3
1. Press the MANUAL PRODUCT KEY (11). The
6
2. Press the TIME ARROW KEYS (3) to enter the
9
11
14
3. Press the TEMPERATURE ARROW KEYS (6)
4. For Cook and Hold --- Press and hold the
5. The READY INDICATOR (4) lights when the
6. Press the START KEY (12). The TIME DISPLAY
7. When the cook time expires the LEDs and dis-
14
nel.
sired cook position. The burners ignite or the
elements come on. The HEAT INDICATOR (7)
lights.
On gas models, if the burner does not ignite
within a few seconds, the RESET ALARM
LIGHT (15) comes on. Press the RESET
SWITCH (16) to restart the burner.
tempts contact a qualified installer.
time and temperature at any point during
manual operation.
manual and fan key LEDs light.
cook time.
For Cook with Pulse --- Press the FAN KEY
(9). Use the TIME ARROW KEYS (3) to enter
the pulse time. The fan key LED flashes.
to enter the cook temperature.
HOLD KEY (8). At the same time, use the TEM-
PERATURE ARROW KEYS (6) to enter the
hold temperature. The hold key LED lights.
oven has reached the cook temperature.
(2) counts down. The manual key LED flashes.
plays flash and an alarm sounds. Press the
STOP KEY (14) to silence the alarm.
NOTE: In Cook and Hold the alarm self can-
cels. The oven cools to the hold tem-
perature. The time display counts up.
Press the HOLD KEY (8) to turn off hold
mode.