End A Ptt Call; Answer An Incoming Call During Ptt - AT&T TL96271 Guide D'utilisation

Multiple handset use
Push-to-talk (PTT)

End a PTT call

• For a one-to-one PTT call, both the originating and destination handsets
can end the PTT call.
• For one-to-group PTT calls, the initiating handset can end the PTT call
for the group of handsets on that PTT call. If any one of the destination
handsets leaves the PTT call, the call continues until all participants or the
initiator hangs up.
To end or leave PTT:
Using a cordless handset:
Press OFF/
CANCEL
charger. The handset displays Push to talk Ended.
NOTES: After PUSH TO TALK is released, the PTT call remains open for a short time. If no
one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
Using a cordless handset:
Press CANCEL or END. The telephone base displays Push to talk Ended.

Answer an incoming call during PTT

When you receive an incoming outside call during PTT, there is a call waiting
tone. The caller ID is displayed with PTT screen alternately.
• During a one-to-one PTT call, press
originating or destination handset, or press
the telephone base. The PTT call ends automatically and the outside call is
answered.
• During a one-to-group PTT call, press
on the originating handset, or press
telephone base. The PTT call ends automatically and the outside call is
answered.
• During a one-to-group PTT call, press
any one of the destination handsets, or press
on the telephone base, and that handset or telephone base answers the
outside call. The PTT call continues for the rest of the PTT participants.
• To leave the PTT call without answering the incoming call, press
OFF/ on the handset, or press
CANCEL
CANCEL on the telephone base. The telephone continues to ring.
, END or place the handset in the telephone base or
HOME/
HOME
86
or CELLULAR
FLASH
HOME or CELLULAR
HOME/ or CELLULAR
FLASH
or CELLULAR
HOME/ or CELLULAR
FLASH
HOME or CELLULAR
HOME, CELLULAR
on the
on
on the
on
or