Bluetooth Setup; Add A Cell Phone - AT&T TL96271 Guide D'utilisation

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone with your telephone, you must first
pair and connect your Bluetooth cellular phone with the telephone base. The
TL96271/TL96371/TL96471
the cell phone line.
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone
base, keep the device within 15 feet of the telephone base for optimal
performance.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth
device. Refer to your cell phone user's manual to learn how to search for or
add new Bluetooth devices.
To pair and connect a cell phone:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press CID or DIR to highlight Bluetooth, then
press SELECT.
3. Press SELECT to choose Add device.
4. Press CID or DIR to highlight Add cellular, then
press SELECT. The screen displays
followed by 1. If cell is connected to BT device,
please disconnect it.
– If there are already four paired devices on the
device list, the 4th device on the device list will be
automatically removed, regardless of whether the
new device pairing is successful or not
• If there are already two active devices on the
device list with prefix D1: or D2:, the handset
shows Only 2 devices can be ready for
connection. You are prompted to deactivate an
active device.
5. Press NEXT. The screen displays 2. Place cell phone
next to base.
– All devices that are connected to the telephone base are
disconnected until the pairing process is completed.
6. Press NEXT to turn on the telephone base discoverable mode. The screen
displays Set cell to search base: AT&T DECT 6.0 discoverable PIN:
0000. Promptly turn on the Bluetooth feature of your cell phone and
search for or add new devices.
can then be used to make or answer calls on
Please wait...
(page 27).
19
The
Directory
Cal ler ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
ADD DEVICE
Add cel lular
Add headset
BACK SELECT
Set cel l to
search base:
AT&T DECT 6.0
discoverable
PIN:0000