Record Your Own Announcement - AT&T TL96271 Guide D'utilisation

Answering system
Answering system settings

Record your own announcement

Using a cordless handset:
1. Press MENU on the handset in idle mode to enter the
main menu.
2. Press CID or DIR to scroll to Answering sys, then
press SELECT.
3. Press SELECT again to select Announcement.
4. The handset displays ANNOUNCEMENT. Press RECORD.
5. The handset announces, "Record after the tone. Press
STOP when you are done." After the tone, speak towards
the microphone of the handset.
6. Press STOP when you finish recording.
7. The handset automatically plays back the newly recorded announcement.
Press STOP to stop the playback at any time. After the announcement
playback, press PLAY
to record again if desired.
Using the telephone base:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press CID or DIR to scroll to Answering sys, then press SELECT.
3. Press SELECT again to select Announcement.
4. The telephone base screen displays ANNOUNCEMENT.
Press RECORD.
5. The telephone base announces, "Record after the tone.
Press STOP when you are done." After the tone, speak
towards the microphone of the telephone base.
6. Press STOP when you finish recording.
7. The telephone base automatically plays back the newly
recorded announcement. Press
After the announcement playback, press
announcement, or
NOTES:
• Your announcement can be up to 90 seconds in length.
• Announcements shorter than two seconds are not recorded.
to replay the recorded announcement, or
STOP to stop the playback at any time.
RECORD to record again if desired.
115
announcement...
Announcement
DELETE
announcement...
Announcement
DELETE
PLAY to replay the recorded
Recording
STOP
playback
STOP
RECORD
Recording
STOP
playback
STOP