Telephone Settings; Handset Settings; Ringer Volume - AT&T TL96271 Guide D'utilisation

Telephone settings

Handset settings

Ringer volume

You can select the ringer volume for incoming calls on line 1, line 2 and the
cell line.
To adjust the handset ringer volume:
1. Press MENU on the handset in idle mode to enter the
main menu.
2. Press CID or DIR to highlight Ringers, then press
SELECT.
3. Press SELECT to choose Ringer volume.
4. Press CID or DIR to select All lines, Home, Cell-D1 or
Cell D2, then press
5. Press CID or DIR to adjust the ringer volume. A sample
of each ringer volume plays as you scroll through
the choices.
-OR-
Press OFF to turn off the ringer. The handset displays
Ringer off.
6. Press SET to confirm. You hear a confirmation tone.
NOTES:
• Changing the handset ringer volume does not affect base ringer volume. For more
information on base ringer volume, see page 55.
• When the ringer volume for all calls (home and cellular) is set to off, a ringer off icon
appears steady. When only one or two of the ringer volume settings are set to off, a
ringer off icon flashes.
• The ringer volume level also determines the ringer levels of intercom calls (page 73).
• For the handsets that support voice announce setting, when the ringer is set as off, the
screen displays Caller ID won't be
SELECT to confirm.
announced. You hear a confirmation tone.
31
RINGERS
Ringer volume
Ringer tone
BACK SELECT
RINGERS VOLUME
Al l lines
Home
Cel l-D1
BACK SELECT
RINGERS VOLUME
OFF SET