Table des Matières
Publicité
Multiple handset use
Push-to-talk (PTT)
You can directly broadcast messages from one handset or
telephone base to the speakerphone of one or all other
handsets. Any handset called can respond by pressing
PUSH TO TALK or PTT on the telephone base to begin a two-
way communication. If only one device is available or registered,
the screen shows PTT requires two handsets when you press
PUSH TO TALK.
•
Only one handset can talk at a time. To do so,
press and hold the PUSH TO TALK button.
•
You must release PUSH TO TALK, so the other person
can respond.
•
Only one PTT can be active at a time.
•
While PTT is in use between handsets or telephone base, other handsets
cannot use the intercom feature but can access the answering system.
•
When you attempt to place a PTT call to another handset which is
accessing the answering system, your handset displays Not available at
this time.
PTT on/off
You can turn PTT on or off on each handset.
•
When on, the handset can begin and receive PTT calls.
•
When off, the handset can begin PTT calls but will not receive
PTT calls from other handset(s). The idle handset displays
No Incoming PTT.
•
When you attempt to place a PTT call to another handset
that has the PTT feature turned off, your handset displays
Not available at this time.
To turn PTT on or off:
Using a cordless handset:
1.
Press PUSH TO TALK when the handset is not in use. The
PUSH TO TALK menu displays.
2.
Press
CID or DIR
press SELECT.
3.
Press
CID or DIR
You hear a confirmation tone.
to highlight PTT On/Off, then
to highlight On or Off, then press
79
PUSH TO TALK
HANDSET A
2
HANDSET B
3
Group
BACK
SELECT
INCOMING PTT
On
Off
BACK
SELECT
SELECT
to save.
Publicité
Table des Matières
Dépannage
