Use Caller Id To Automatically Set Date And Time; Dial Mode - AT&T TL96271 Guide D'utilisation

Telephone settings
Telephone base settings

Use caller ID to automatically set date and time

If you subscribe to caller ID service, the date and time will be set
automatically by the caller ID information. You can turn off this feature if you
want to set the date and time manually.
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CID or DIR to highlight Settings, then
press SELECT.
3. Press CID or DIR to select CID time sync, then
press SELECT.
4. Press CID or DIR to select On or Off, then press
SET to save. You hear a confirmation tone.

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To change the setting:
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CID or DIR to highlight Settings, then
press SELECT.
3. Press CID or DIR to highlight Dial mode, then
press SELECT.
4. Press CID or DIR to choose Tone or Pulse, then
press SET to save. You hear a confirmation tone.
NOTE: While you are on a call in pulse dialing mode, press TONE
to temporarily change to tone dialing mode.
51
SETTINGS
LCD language
Rename base
CID time sync
BACK SELECT
CID TIME SYNC
On
Off
BACK SET
SETTINGS
Rename base
Key tone
Dial mode
BACK SELECT
DIAL MODE
Tone
Pulse
BACK SET