AT&T TL96271 Guide D'utilisation page 116

Caller ID
Caller ID operation
Using the telephone base:
1. Select a desired entry in the caller ID log (see Review the caller ID log on
page 107).
2. When the desired entry appears, press # repeatedly to show different
dialing options.
3. When the number is in the correct format, press SAVE. The telephone base
shows EDIT NUMBER.
4. Use the dialing keys to edit the number.
• Press DELETE/X to erase a digit.
• Press and hold DELETE/X to erase all digits.
• Press CID or DIR to move the cursor to the right or left.
• Press and hold
REDIAL
5. Press NEXT.
6. Press CID or DIR to highlight one of the following types:
• Home
• Cell
• Work
• Other
7. Press NEXT. The telephone base screen displays EDIT NAME.
8. Use the dialing keys (see page 91) to edit the name.
• Press DELETE/X to erase a character.
• Press and hold DELETE/X to erase all characters.
• PPress CID or DIR to move the cursor to the left or right.
• Press TONE to toggle the name order. For example, Robert Brown
becomes Brown Robert when you press TONE .
9. Press SAVE to confirm and the telephone base screen shows Saved. You
hear a confirmation tone.
NOTES:
• If the name received from the telephone service provider is in all capital letters,
the first letter of every word remains a capital letter. However, the next letter after
the prefix "Mac", "Mc", or "O'", is kept as a capital letter. For example, the "D" in
"MacDonald" is kept as a capital letter.
• When you try to save a caller ID entry without any caller ID information, the screen
displays Unable to save.
• When you try to save a number already stored in the directory, the screen shows
Already saved.
/PAUSE to insert a dialing pause (a p appears).
110