Cell Area Code - AT&T TL96271 Guide D'utilisation

Telephone settings
Handset settings

Cell area code

Most cell phone entries are stored in a 10-digit format. If all of your cell
phone entries are stored this way, you do not need to program your cell
area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly using your home line.
To set the cell area code:
1. Press MENU on the handset in idle mode to enter the main menu.
2. Press CID or DIR to highlight Directory, then press SELECT.
3. Press CID or DIR to highlight a desired downloaded directory, then
press OPTION.
4. Press SELECT to choose Cell area code. The handset displays Only for 7
digits dialing from Caller ID log.
5. Use the dialing keys to enter the desired cell area code.
• Press /DELETE to erase a digit.
MUTE
• Press CID to move the cursor to the right or DIR to the left.
6. Press SELECT to confirm. The handset screen displays Area code will not
show in Caller ID log. You hear a confirmation tone.
42