Call Waiting On Home Call; Make, Answer Or End A Cell Call - AT&T TL96271 Guide D'utilisation

Telephone operation
Make, answer and end a call

Call waiting on home call

If you subscribe to call waiting service from your telephone service provider,
you hear a tone if someone calls while you are already on a call.
• Press /FLASH on the handset, or press FLASH on the telephone
HOME
base to put your current call on hold and take the new call.
• Press /FLASH on the handset, or press FLASH on the telephone
HOME
base at any time to switch back and forth between calls.

Make, answer or end a cell call

You can connect a maximum of two Bluetooth enabled cell phones to the
telephone base, but only one cell phone can be used on a cell call at a time.
The TL96271/TL96371/TL96471
the cell phone line.
Using a cordless handset:
To make a cell call:
• Enter the telephone number, then press
-OR-
1. Press CELLULAR.
2. Enter the telephone number, then press DIAL.
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls. If you have two cell phones
connected to the telephone base, the telephone system prompts you to select
a cell phone before you make a cell call.
To answer a cell call:
• Press CELLULAR.
To end a cell call:
• Press OFF/
CANCEL
NOTES:
• You can also use your cell phone to answer the call. If you answer with your cell phone,
it disconnects from the telephone base.
• When you try to make a cell call but your cell phone is not connected to the base, the
cordless handset displays No cellular is ready for connection Press
connect your cell phone to the telephone system. Refer to Bluetooth connection from
idle mode on page 26 and Connect/disconnect an active device on page 23.
can be used to make or answer calls on
CELLULAR.
or put the handset in the charger.
58
CONNECT to