Message Playback - AT&T TL96271 Guide D'utilisation

Answering system

Message playback

On the telephone base, if you have new messages, the telephone plays only
the new messages in chronological order. If there are no new messages, the
telephone plays back all messages in chronological order.
On the handset, if you have both new and old messages, you can play either
new or old messages. The caller ID information displays on the handset
screen when you play messages and you can call back the caller.
When playback begins, the handset screen displays the message status,
caller ID information, and time and date of the message recorded. You hear
the total number of messages followed by the day and time of the message.
After the last message, the telephone announces, "End of messages." and the
screen displays End of messages.
To listen to messages with the telephone base:
1. Press /PLAY/
STOP
Options during playback:
• Press VOLUME
• Press /SKIP to skip to the next message.
• Press /REPEAT to repeat the message currently playing.
Press /REPEAT twice to listen to the previous message.
• Press X/DELETE to delete the current message. The system advances
to the next message.
• Press 2 to pause the playback and show the caller ID information.
Press HOME or
use the cell line to call back the caller.
Press CANCEL or
back within 10 seconds, message playback resumes.
• Press HOME or
The telephone base screen displays Call back? with the caller ID
information. Press
message playback.
• Press / /STOP to stop.
PLAY
to listen to messages.
to adjust the speaker volume.
DIAL to use the home line, or press
BACK to resume the playback. If you do not call
CELLULAR to pause the message playback.
YES to call back the caller, or
124
CELLULAR to
NO to resume the