Number Of Rings - AT&T TL96271 Guide D'utilisation

Answering system
Answering system settings

Number of rings

When the answering system is turned on, it answers all incoming home calls
after the number of rings set. You can choose from two, three, four, five, or
six rings; or toll saver. With toll saver selected, the answering system answers
after two rings when you have new messages, and after four rings when you
have no new messages.
This enables you to check for new messages and avoid paying unnecessary
long distance charges if you are calling from out of your local area. The
default number of rings is four.
To set the number of rings:
Using a cordless handset:
1. Press MENU on the handset in idle mode to enter the
main menu.
2. Press CID or DIR to highlight Answering sys, then
press SELECT.
3. Press CID or DIR to highlight Ans sys setup, then
press SELECT.
4. Press CID or DIR to highlight # of rings, then
press SELECT.
5. Press CID or DIR to choose from 6, 5, 4, 3, 2 or
Toll saver, then press
Using the telephone base:
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CID or DIR to highlight Answering sys, then
press SELECT.
3. Press CID or DIR to highlight Ans sys setup, then
press SELECT.
4. Press CID or DIR to highlight # of rings, then
press SELECT.
5. Press CID or DIR to choose from 6, 5, 4, 3, 2 or
Toll saver, then press
SET to save. You hear a confirmation tone.
SET to save. You hear a confirmation tone.
118
ANS SYS SETUP
Cal l screening
# of rings
Remote code
BACK SELECT
# OF RINGS
6
5
4
BACK SET
ANS SYS SETUP
Cal l screening
# of rings
Remote code
BACK SELECT
# OF RINGS
6
5
4
BACK SET