Hold; Equalizer - AT&T TL96271 Guide D'utilisation

Telephone operation
Options while on calls

Hold

You can place any call on hold. You hear an alert tone at the telephone base
if you have not taken the call off of hold after 14 minutes. You hear another
alert tone at the telephone base 30 seconds later. At 15 minutes on hold, the
call on hold automatically disconnects.
To place a home call on hold:
• Press HOLD on the handset or telephone base.
Home call on hold appears on the handsets
and telephone base.
the handsets and
base flashes.
To resume a home call on hold:
• Press HOME/
FLASH
To place a cell call on hold:
• Press HOLD on the handset or telephone base. Cell call on hold appears
on the handsets and telephone base.
on the telephone base flash.
To resume a cell call on hold:
• Press CELLULAR. on the handset or telephone base.

Equalizer

The equalizer feature on the handset enables you to change
the quality of the handset audio to best suit your hearing.
While on a call, or listening to a message or announcement,
press EQ to select the equalizer setting Treble 1, Treble 2,
Bass or Natural (the default setting) for the handset. The
current setting is shown on the handset for two seconds.
NOTES:
• The equalizer feature does not apply to the speakerphone on the telephone base or the
connected Bluetooth headset.
• If you switch the call between the handset and speakerphone by pressing
the audio setting remains unchanged.
• The current equalizer setting remains unchanged until a new setting is selected.
HOME/ flashes on
FLASH
HOME on the telephone
on handsets and HOME on the telephone base.
CELLULAR
65
on the handsets and
/SPEAKER,